亚洲欧美日韩一区二区

  • <bdo id="crg8q"><center id="crg8q"></center></bdo>
    <table id="crg8q"></table>
    <table id="crg8q"></table>

  • <tr id="crg8q"><s id="crg8q"></s></tr>
      Skip navigation Accessibility information

      Index of Materials - H



      Metals and Materials for Research and Industry

      Goodfellow supplies metals, polymers, ceramics and other materials to meet the research, development and specialist production requirements of science and industry worldwide.

      This interactive Catalogue lists all our standard products. You can buy all of them online but if you cannot find exactly what you need, please contact us.


      H - Grade
      H14 - Temper
      H32 - Temper
      Hafnium ( Hf )
      Hafnium > 0.2% - Condition
      Hafnium Carbide ( HfC )
      Hafnium Diboride ( HfB2 )
      Hafnium Hydride ( HfH2 )
      Hafnium Oxide ( HfO2 )
      Halar - Ethylene-Chlorotrifluoroethylene copolymer ( E-CTFE )
      Half Hard - Temper
      Half-round Closed At One End - Condition
      Hard - Temper
      Hastelloy® B - Corrosion Resistant Alloy ( Ni62/Mo28/Fe 5/Cr/Mn/Si )
      Hastelloy® B-2 ( Ni68/Mo28/Fe 2/Cr 1/Co 1 )
      Hastelloy® B-3 ( Ni65/Mo28.5/Cr 1.5/Fe 1.5/(Co + Mn + W ) 3.5max )
      Hastelloy® C - Hastelloy® C276 - Heat Resisting Alloy ( Ni57/Mo17/Cr16/Fe/W/Mn )
      Hastelloy® C-22 ( Ni59/Cr22/Mo13/Fe 3/W 3 )
      Hastelloy® C276 - Heat Resisting Alloy ( Ni57/Mo17/Cr16/Fe/W/Mn )
      Hastelloy® X ( Ni49.5/Cr22/Fe18/Mo 9/Co 1/W )
      Havar® - High-Strength Non-Magnetic Alloy ( Co42.5/Cr20/Ni13/Fe/W/Mo/Mn )
      Haynes® 230 alloy ( Ni62/Cr22/W 14/Mo 2 )
      Heat Sealable - Minimum 130°C - Grade
      Heat shrink temperature - 330°C - 400°C
      Heat Stabilised - Condition
      Heat Stabiliser Only - Additives
      Heat-Shrinkable Tubing - 0.65mm Minimum I/D
      Heat-Shrinkable Tubing - 0.93mm Minimum I/D
      Heat-Shrinkable Tubing - 1.6mm Minimum I/D
      Heat-Shrinkable Tubing - 3.7mm Minimum I/D
      Heat-Shrinkable Tubing - 4.4 mm Minimum I/D
      Heat-Shrinkable Tubing - 4.5mm Minimum I/D
      Heat-Shrinkable Tubing - 5.7mm Minimum I/D
      Hecnum® - Constantan® - Resistance Alloy ( Cu55/Ni45 )
      Hexafluoropropylenevinylidenefluoride copolymer ( FKM )
      Hexagonal - Phase
      Hiduminium® - Dural® - Aluminium/Copper/Magnesium ( Al95/Cu 4/Mg 1 )
      High (>140g/in3) - Linear Density
      High Density Calcium Silicate ( Ca2SiO4 )
      High Permeability Magnetic Alloy ( Ni80/Fe15/Mo 5 )
      High Purity
      High Temperature Black Copper Oxide - Coating
      High Tenacity - Condition
      High Viscosity - Condition
      Hollow - Condition
      Holmium ( Ho )
      Homopolymer - Condition
      Honeycomb
      HOPG - ZYH - Grade
      Hostaflon - Polytetrafluoroethylene filled with Glass ( PTFE 25% GF )
      Hostaflon ET - Ethylene-Tetrafluoroethylene Copolymer ( ETFE )
      Hostaflon FEP - Fluorinated Ethylene Propylene Copolymer ( FEP )
      Hostaflon TF - Polytetrafluoroethylene ( PTFE )
      Hostaform - Polyoxymethylene - Copolymer ( Acetal - Copolymer POMC )
      Hostalen GUR - Polyethylene - U.H.M.W. ( UHMW PE )
      Hostalen HD - Polyethylene - High density ( HDPE )
      Hostalen PP - Polypropylene ( PP )
      Hostalit - Polyvinylchloride - Unplasticised ( UPVC )
      Hostaphan - Polyethylene terephthalate ( Polyester, PET, PETP )
      Hot Isostatic Pressed - Condition
      Hot Pressed - Condition
      Hot Rolled (Black) - Condition
      Hot Rolled - Condition
      HS40 - Grade
      HT - Grade
      Hydrogel - Polyacrylamide/acrylate ( Hydrogel )

      Index